Paper Making Gate Valve Quarter Turn Electric Actuator 120NM
CKDJ electric actuator design is simple and compact structure, with a very broad torque output range, the output angle 0 ~ 90 ° (90 ° ~ 300 ° optional), widely used in power plants, metallurgy, petroleum, chemical, water, machinery, light workers, fire and environmental protection industries.
The actuators accepts 4-20mADC input signal to achieve position and process control, and use an absolute type, linear position sensing device provides 4-20mADC valve position feedback. Analog input signal with electrical isolation, short circuit protection, open circuit detection, and can be non-polar connection, user-friendly field wiring and commissioning. The control module uses solid state starter for three-phase or single-phase power supply, meet at least 1200 starts / hour requirement.
●accuracy: ± 1%
●linear: ± 0.5% (relative to the full trip)
●deadband: 0.1% to 9.9%, adjustable in 0.1% increments (factory default setting: 1.0%)
●delay time: 1 second
●input impedance: 300Ω
●drift: <± 200ppm
●invert: 4-20mA (20mA=fully open)or 20-4mA (4mA=fully open)
(factory default setting: 20mA = fully open)
●lost signal action: When the input signal is lost, the actuators move to fully open position, fully closed position, the pre-specified location, or stop at the current position (factory default setting: Stop at the current position)
Loss of Signal: Input signal <= 2.3mA
Description:
1. Product Name: CKDJ series Part-Turn Modulating Actuator
2. Power Supply: Single Phase or Three Phase, Maximum Voltage: 480 Volt, Frequency: 50/60 Hz
3. Material: Aluminum Casting
4. Type: Regulating Type, Field Bus
5. Work Mode: S4-25% duty, 1200 starts/hour
6. Torque: 40N.m to 35,000N.m
8. Motor Insulation Class: F Class, H Class can be customized
9. Protection Grade: IP 68
10. Explosion Proof Protection: Exd II BT4/ CT4(some product can reach Exd II CT 6)
11. Environmental Temperature: -30 ℃-70℃(Standard),Maximum 125 ℃ ,while Minimum -50 ℃
12. Coating: Phosphoric acid pickling,Surface electrostaic spray
13. Joint Type: Flange, comply with ISO 5211
14. Certification: ATEX, CE, etc
15. Application: Mainly for Control Valve to control the flow condition
Datasheet of Part-turn Modulating Actuator(integration)
No. |
CKDJ Series |
Power Type |
Torque (N.m) |
Travel Time(S) |
ISO Flange |
1 |
CKDJ5 |
380V/3PHASE/50HZ |
50 |
25 |
F07/10 |
2 |
CKDJ5 |
380V/3PHASE/50HZ |
40 |
12 |
F07/10 |
3 |
CKDJ 10 |
380V/3PHASE/50HZ |
100 |
25 |
F07/10 |
4 |
CKDJ 10 |
380V/3PHASE/50HZ |
80 |
12 |
F07/10 |
5 |
CKDJ 16 |
380V/3PHASE/50HZ |
160 |
25 |
F10/12 |
6 |
CKDJ 16 |
380V/3PHASE/50HZ |
120 |
12 |
F10/12 |
7 |
CKDJ 20 |
380V/3PHASE/50HZ |
200 |
25 |
F10/12 |
8 |
CKDJ 20 |
380V/3PHASE/50HZ |
160 |
12 |
F10/12 |
9 |
CKDJ 30 |
380V/3PHASE/50HZ |
300 |
25 |
F10/12 |
10 |
CKDJ 30 |
380V/3PHASE/50HZ |
240 |
12 |
F10/12 |
11 |
CKDJ 40 |
380V/3PHASE/50HZ |
400 |
25 |
F10/12 |
12 |
CKDJ 40 |
380V/3PHASE/50HZ |
320 |
12 |
F10/12 |
13 |
CKDJ 50 |
380V/3PHASE/50HZ |
500 |
25 |
F10/12 |
14 |
CKDJ 50 |
380V/3PHASE/50HZ |
400 |
12 |
F10/12 |
15 |
CKDJ 60 |
380V/3PHASE/50HZ |
600 |
25 |
F10/12 |
16 |
CKDJ 60 |
380V/3PHASE/50HZ |
500 |
12 |
F10/12 |
17 |
CKDJ 80 |
380V/3PHASE/50HZ |
800 |
29 |
F12/14 |
18 |
CKDJ 80 |
380V/3PHASE/50HZ |
600 |
15 |
F12/14 |
19 |
CKDJ 100 |
380V/3PHASE/50HZ |
1000 |
29 |
F12/14 |
20 |
CKDJ 100 |
380V/3PHASE/50HZ |
800 |
15 |
F12/14 |
Datasheet of Part-turn Modulating Actuator(combination)
No. |
Actuator/Gearbox |
Power Type |
Torque Scale (N.m) |
Travel Time(S) |
ISO Flange |
1 |
CKD4/JW60A |
380V/3PHASE/50HZ |
180-500 |
25 |
F10 |
2 |
CKD10/JW80A |
380V/3PHASE/50HZ |
500-1000 |
25/12.5 |
F14 |
3 |
CKD10/JW100A |
380V/3PHASE/50HZ |
1000-3000 |
44/22 |
F14/F16 |
4 |
CKD25/JW125A |
380V/3PHASE/50HZ |
3000-6000 |
44/22/11 |
F16/25 |
5 |
CKD25/JW140A |
380V/3PHASE/50HZ |
6000-10000 |
88/44/22 |
F25/30 |
6 |
CKD60/JW200A |
380V/3PHASE/50HZ |
10000-20000 |
44/22 |
F25/30 |
7 |
CKD60/JW250A |
380V/3PHASE/50HZ |
20000-35000 |
82/41/21 |
F30/35 |
With the aid of wide expertise and experience, Hengchun Electronics researches, develops, manufactures and exports high quality and durable paper making gate valve quarter turn electric actuator 120nm at low price. This special actuators made in China comes in advanced and stable performance, high accuracy, long lifespan, etc. You can rest assured to buy.